Classic moisture-proof diffuser luminaire with two-part luminaire design. For escape route illumination. Housing made of shockproof, UV-resistant plastic (polycarbonate). Injected silicone-based seal with increased resistance even under extreme conditions. Diffuser made of shockproof opal plastic (polycarbonate) with excellent light transmission of up to 90%. Diffuser fixed by stainless steel clips for easy installation and opening. Symmetrical light distribution. Homogeneous light distribution. Flexible and easy installation thanks to sliding quick-fix brackets made of stainless steel and diffuser with integrated gear tray as well as variable cable entry (face or rear sided). Suitable for Ceiling mounting, Suspension cable/chain, Wall (surface). Ceiling mounting stainless steel brackets and triangular brackets for pendant mounting included in delivery. Driver integrated. Suitable for connection to central battery systems. With AC Control monitoring module for LUXIFAIR central battery units.
Technical Specifications
| Typ of emergency lighting | Central battery system |
|---|---|
| Monitoring | Luxifair AC-Control |
| Battery | without |
| Operating mode | maintained power mode |
| Length L | 1454 mm |
| Width B | 102 mm |
| Height H | 85 mm |
| Weight | 2.4 kg |
| Light source | LED |
| Colour temperature | 4000 K |
| Rated luminous flux, mains operation | 8600 lm |
| System power, mains operation | 58 W |
| Rated luminous flux, emergency operation | 800 lm |
| System power, emergency operation | 9 W |
| System efficiency | 148 lm/W |
| Glare evaluation RUG (4H 8H) | 26,8 |
| Beam angle |
down 132°/108° up 180°/180° |
| Rated life | 100000 h |
| Colour rendering index (CRI) | 80 |
| Photobiological safety according to EN 62471 | Risk group 1 |
| Driver | Converter |
| Control | on/off |
| Voltage | 220 - 240 V / 0 Hz, 50 Hz, 60 Hz |
| Luminaires on B10A fuse | 12 |
| Luminaires on B16A fuse | 20 |
| Luminaires on C10A fuse | 20 |
| Luminaires on C16A fuse | 34 |
| Inrush current / Inrush current duration | 25 A / 230 µs |
| CIE Flux Code / CEN Flux Code | 42 72 91 92 100 |
| Type of protection | IP 66 |
| Protection class | I |
| Filament test | 850 °C |
| Impact resistance | IK08 |
| Ambient temperature for maintained power | -10 °C ... + 35 °C |
| Safety marks | D-mark |
| Conformity mark | CE , EAC |
Downloads
Light Calculator
The Online Light Calculator's purpose is a quick calculation and the results may not be perfectly accurate.