Architectural wall luminaire for the illumination of areas close to buildings. Housing made of corrosion-resistant die-cast aluminium, seawater resistant powder-coated. With membrane valve as a standard to avoid condensed water. Cover for light emission, opal single-pane toughened glass, edge printed. Replaceable LED unit. Light emission: on two sides. Uniform, soft and glare-reduced illumination. Very easy installation thanks to plug & play connection. Base fixing slots outside of gasketed area, drill hole deviations can be compensated. Luminaire can be mounted in any focal position. Driver integrated. MultiLumen: 3 steps adjustable luminous flux. Factory setting is the highest luminous flux. Suitable for through-wiring.
Technical Specifications
| Length L | 303 mm |
|---|---|
| Width B | 130 mm |
| Height H | 79 mm |
| Weight | 2.34 kg |
| Light source | LED |
| Colour temperature | 4000 K |
| Rated luminous flux | 570 lm | 1100 lm | 1550 lm |
| System power | 8 W | 15 W | 23 W |
| System efficiency | 67 lm/W | 71 lm/W | 73 lm/W |
| Glare evaluation RUG (4H 8H) | 18,1 | 20,3 | 21,5 |
| Beam angle |
down 106° up 106° |
| Rated life | 50000 h (L90/B50) |
| Colour rendering index (CRI) | 80 |
| Colour tolerance (McAdam) | 3 SDCM |
| Photobiological safety according to EN 62471 | Risk group 0 |
| Driver | Converter |
| Control | on/off |
| Voltage | 220 - 240 V / 50 Hz, 60 Hz |
| Luminaires on B10A fuse | 55 |
| Luminaires on B16A fuse | 90 |
| Luminaires on C10A fuse | 92 |
| Luminaires on C16A fuse | 150 |
| Inrush current / Inrush current duration | 8 A / 48 µs |
| CIE Flux Code / CEN Flux Code | 50 83 98 50 100 |
| Type of protection | IP 65 |
| Protection class | I |
| Filament test | 650 °C |
| Impact resistance | IK04 |
| Ambient temperature | -20 °C bis + 35 °C |
| Conformity mark | CE , EAC |
