Architectural wall luminaire for the illumination of areas close to buildings. Housing made of corrosion-resistant die-cast aluminium, seawater resistant powder-coated. With membrane valve as a standard to avoid condensed water. Cover for light emission, opal single-pane toughened glass, edge printed. Replaceable LED unit. Light emission: on two sides. Uniform, soft and glare-reduced illumination. Very easy installation thanks to plug & play connection. Base fixing slots outside of gasketed area, drill hole deviations can be compensated. Luminaire can be mounted in any focal position. Driver integrated. MultiLumen: 3 steps adjustable luminous flux. Factory setting is the highest luminous flux. Suitable for through-wiring.    

Series: DESMONDO
Reference Number: 612338.0031.1
Colour: anthracite metallic (DB703)
Length: 303 mm
Width: 130 mm
Height: 79 mm
Weight: 2.34 kg
Lamp: LED
Socket: without socket
Colour temperature: 4000K
Colour rendering index (CRI): 80
Colour tolerance (McAdam): 3 SDCM
Rated life: 50000 h (L90/B50)
System power: 8 W
Rated luminous flux: 570 lm
Beam angle Down: 106°
Beam angle Up: 106°
Luminous efficiency: 71 lm/W
System power 2: 15 W
Rated luminous flux 2: 1100 lm
Beam angle Down 2: 106°
Beam angle Up 2: 106°
Luminous efficiency 2: 73 lm/W
System power 3: 23 W
Rated luminous flux 3: 1550 lm
Beam angle Down 3: 106°
Beam angle Up 3: 106°
Luminous efficiency 3: 67 lm/W
Light outlet: direct/indirect
Light sharing: symmetrical
Control gear: Regulated power supply
Voltage: 220 - 240 V / 50 Hz, 60 Hz
Power factor: 0.95
Protection class: I
Luminaires on B10A fuse: 55
Luminaires on B16A fuse: 90
Luminaires on C10A fuse: 92
Luminaires on C16A fuse: 150
Inrush current / Inrush current duration: 8 A / 48 µs
Ripple current / Flicker: 3 %
Total harmonic distortion: 10 %
Type of protection: IP 65
Ambient temperature: -20 °C to + 35 °C
Impact resistance: IK04
Filament test: 650 °C
Conformity mark: CE, EAC