Classic moisture-proof diffuser luminaire with two-part luminaire design. For escape route illumination. Housing made of shockproof, UV-resistant plastic (polycarbonate). Injected silicone-based seal with increased resistance even under extreme conditions. Diffuser made of UV-resistant opal plastic (PMMA) with excellent light transmission of up to 90% Diffuser fixed by stainless steel clips for easy installation and opening. Symmetrical light distribution. Homogeneous light distribution. Flexible and easy installation thanks to sliding quick-fix brackets made of stainless steel and diffuser with integrated gear tray as well as variable cable entry (face or rear sided). Suitable for Ceiling mounting, Suspension cable/chain, Wall (surface). Ceiling mounting stainless steel brackets and triangular brackets for pendant mounting included in delivery. Self-contained system with automatic self-test and feedback via DALI bus, only to RZB DALI monitoring system.
Technical Specifications
| Typ of emergency lighting | Self-contained system |
|---|---|
| Monitoring | DALI-Sibe |
| Battery | LiFePO4 |
| Duration | 3 h |
| Operating mode | maintained power mode |
| Length L | 1454 mm |
| Width B | 102 mm |
| Height H | 85 mm |
| Weight | 2.55 kg |
| Light source | LED |
| Colour temperature | 4000 K |
| Rated luminous flux, mains operation | 7200 lm | 9200 lm |
| System power, mains operation | 46 W | 60 W |
| Rated luminous flux, emergency operation | 490 lm |
| System efficiency | 153 lm/W | 157 lm/W |
| Glare evaluation RUG (4H 8H) | 26,3 | 27,1 |
| Beam angle |
down 130°/104° up 180°/180° |
| Rated life | 100000 h |
| Colour rendering index (CRI) | 80 |
| Photobiological safety according to EN 62471 | Risk group 1 |
| Driver | Converter |
| Control | on/off |
| Voltage | 220 - 240 V / 50 Hz, 60 Hz |
| Luminaires on B10A fuse | 12 |
| Luminaires on B16A fuse | 19 |
| Luminaires on C10A fuse | 20 |
| Luminaires on C16A fuse | 32 |
| Inrush current / Inrush current duration | 21 A / 316 µs |
| CIE Flux Code / CEN Flux Code | 43 73 91 93 100 |
| Type of protection | IP 66 |
| Protection class | I |
| Filament test | 650 °C |
| Impact resistance | IK04 |
| Ambient temperature for maintained power | 5 °C ... + 25 °C |
| Safety marks | D-mark |
| Conformity mark | CE , EAC |
Downloads
Light Calculator
The Online Light Calculator's purpose is a quick calculation and the results may not be perfectly accurate.