In-ground luminaires, stainless steel

In-ground luminaire for pedestrian areas. Housing made of epoxy resin thermoset, stainless steel, aluminium. Round marine grade stainless steel cover, mill finish. The interior of the housing is sealed in accordance with IP 68 even during installation. Integral vapour seal against condensed water. Flush mounted toughened glass with secondary sealing glass. High performance LED refractor optics. Aiming can be adjusted by up to 15° from the vertical from the outside while fitting is already mounted in place and sealed. With H07RN8-F connecting cable, L 500 mm. Use of in-ground support is necessary, please order separately

Technical Specifications

Diameter D 190 mm
Height H 2 mm
Cut-out diameter DA 175 mm
Recess height HE 200 mm
Luminaire: recess height HEL 160 mm
Weight 2.6 kg
Light source LED
Colour temperature 2700 K
Rated luminous flux 800 lm
System power 12 W
System efficiency 67 lm/W
Beam angle 37°
Colour rendering index (CRI) 80
Colour tolerance 4 SDCM
Photobiological safety according to EN 62471 Risk group 2
Driver Converter
Control on/off
Voltage 220 - 240 V / 0 Hz, 50 - 60 Hz
Luminaires on B10A fuse 17
Luminaires on B16A fuse 27
Luminaires on C10A fuse 28
Luminaires on C16A fuse 45
Inrush current / Inrush current duration 27 A / 250 µs
CIE Flux Code / CEN Flux Code 0 0 0 0 100
Type of protection IP 68
Protection class II
Filament test 750°C - 30 seconds
Impact resistance
Ambient temperature -25 °C ... + 45 °C
Safety marks F-mark
Conformity mark CE


In-ground support
Glass, non-slip
H-distributor IP 68
IP 68 plug connector


Spare glass