Light top unit of the modular column system LUPALO. Light top unit made of corrosion resistant pressure die-cast aluminium (seawater resistant powder-coated). Stainless steel screws. Membrane valve to prevent condensation. Non-yellowing clear glass cylinder. LED module with optimised optic lenses for sophisticated lighting solutions. Asymmetrical linear light distribution for wide streets and paths according to DIN EN 13201. For top mounting on compatible system tubes. Fastening of the light top unit to a bollard via a bayonet. Control gear with integrated surge protection. With NFC programming interface. 4 x 1.0 mm² connecting cable included, length 6 m. Note modular design: A post or a charging column is always required for the light top unit. Module must be ordered separately. Series: LUPALO Reference Number: 612329.0031.1.76 Colour: anthracite metallic (DB703) Diameter: 187 mm Height: 850 mm Weight: 7.7 kg Lamp: LED Socket: without socket Colour temperature: 4000K Colour rendering index (CRI): 70 Colour tolerance (McAdam): 5 SDCM Rated life: 100000 h (L80/B10) System power: 55 W Rated luminous flux: 5550 lm Beam angle Down: 73° / 45° / 73° / 0° Luminous efficiency: 101 lm/W Light outlet: direct Light sharing: asymmetric Control gear: Converter, dimmable, DALI Voltage: 220 - 240 V / 50 - 60 Hz Power factor: 0.95 Protection class: II Luminaires on B10A fuse: 8 Luminaires on B16A fuse: 12 Inrush current / Inrush current duration: 54 A / 200 µs Ripple current / Flicker: 6 % Total harmonic distortion: 10 % Type of protection: IP 65 Ambient temperature: -20 °C to + 40 °C Impact resistance: IK06 (1 Joule) Filament test: 650°C - 30 seconds Safety marks: Nicht im Handbereich montieren Conformity mark: CE